Images are representations only.
PGC5009 Fast Process Gas Chromatograph
Brand: ABB GroupA relatively small shift in the cut point for any refinery product can cost refiners millions in profits.
In the absence of fast, accurate and reproducible boiling point data, refinery product yields are not optimized and more importantly, profits are lost.
The PGC5009 represents the best in process analytics for simulated distillation analysis using fast temperature programmed process chromatography.
With a patented resistively heated column design and rapid cooling system, the PGC5009 provides superior chromatography.
The results are proven: accurate and reproducible retention times and weight percentage measurements required for boiling point curve calculation enabling optimized refinery process control.
Features- ASTM D3710 (Gasoline) in less than 4 minutes
- ASTM D2887 (Diesel) in less than 5 minutes
- Patented resistively heated micro packed column design for fast C1-C36 separation
- 7 days of chromatogram and report storage comes standard on the PGC5000A Master controller with a removable SD card
- Integrated sample system communication for remote health monitoring
- Connectivity to the STAR Data Management System
- Open, accessible oven and electronics enclosure design
Specifications
Brand
Environmental Protection
- Oven: IP54 (NEMA 12 Equivalent)
Ambient Temperature
- 0° to 50° C (32° to 122° F)
Humidity
- 95 % Relative Humidity, Non-Condensing
Mounting
- Wall: 41.3 mm (1.6 in.) from wall with brackets
EMI / RFI
- Conforms to Class A industrial environment
Certifications & Approvals
- NEC, CSA/NRTL, ATEX/IEC: Class I, Divisions 1 Group B, C, D (T3 or T2), Conforms to IECEx/ATEX Directive 2014/34/EU and EMC, Directive 2014/30/EU, Zone 1: CE II 2G, Ex db eb ib pxb IIB+H₂(T3 or T2) Gb
Power Requirement
- 100 Vac (+15, -6 Vac), 120 Vac ± 10 %, 230 Vac ± 10 %, 50/60 Hz ± 10 %
Power Consumption
- 1,200 VA Max., 240 VA Typical
Tube Connection
- Gas Control: 1/16”, 1/8”, 1/4” Gyrolok/Swagelok Tube Fitting
- Supply: 3/8” Tube, mininum
Pressure
- Gas Control: Max. 1,034 kPa (150 psig)
- Gas Control: Inlet Set Point 69 kPa (10 psig) minumum
- Supply: High 586 to 690 kPa (85 to 100 psig) with 10 scfm vortec Cooler
- Supply: Low 414 to 690 kPa (60 to 100 psig) with 15 scfm
Flow Rate
- Steady State 278 L/min (9.8 ft³ /min)
- Maximum L/min (12.0 ft³ /min)
Accuracy
- 50-100 psig: 2.7 %
- 0-50 psig: 1.7 %
Repeatability
- +0.1 psig
Media
- H₂ , He , N₂ , Air
Material of Construction
- Tube: 316 Stainless Steel (Gas Control)
- Optimize and control refinery processes
