Images are representations only.
SPR-08 3/2 Pilot-Operated Direct-Acting Solenoid
Brand: Bifold - by Rotork
Specifications
- Solenoid valve: SIL 3 third party certified
- Solenoid free to rotate through 360°
- 316L stainless steel solenoid enclosure and valve. Aluminum options available
- Low power - 1.8 W
- High flow - Up to 11.1 Cv
- Arctic service options to -60° C
- Worldwide solenoid approvals Ex emb, Ex d, Ex ia & explosion proof
- Up to and including 508 psi / 35 bar working pressure
Specifications
Brand
Actuator Type
- Plunger Operated
- Spring Return
Ambient Temperature Range
- -60° to 90° C (-76° to 194° F)
Approvals & Certifications
- ATEX II 2 GDc, Ex Emb IIC T4
- CE
- CPT
- CSA
- EAC
- GOST
- IEC 60529, 61508
- IEC Ex Ex Emb IIC T4
- INMETRO
- KC
- NEPSI
BSP Connection
- 1/2” BSPP Female
- 1/4” BSPP Female
- 3/8” BSPP Female
Cable Entry
- 1/2” NPT
- M20 x 1.5
Class
- Class H - Solenoid Insulation
Configuration
- 3-Way, 2-Position
Consumption
- 1.8 W - Power Consumption
- 3.6 W - Power Consumption
Duty Cycle
- 100 % Duty Cycle
Electrical Contacts
- Normally Closed
- Normally Open
Enclosure, Body Material
- 316L Stainless Steel
- Aluminum
Environmental Protection
- Explosion-proof
- IP66
- IP67
- NEMA 4X
Flow Capacity
- 0 to 11.1 Cv
Flow Rate
- 3 Cv
Materials of Construction
- Fasteners: Metric A4 18/10 Grade Stainless Steel Equivalent to 316L Stainless Steel
Media
- Filtered Lubricated or Unlubricated Air
- Inert Gas
- Mineral Oil
- Sweet & Sour Gas
- Water & Glycol Mixtures
NPT Connection
- 1/2” NPT Female
- 1/4” NPT Female
- 3/8” NPT Female
O-Ring Material
- Fluorosilicone
- Nitrile
- Viton
Override
- Auto Reset
- Manual Latch
- Manual Override (Internal Pilot & Rotary Internal Pilot)
- Manual Reset
Power
- 1.8 W
Power Requirement
- 3 to 6.8 W
Pressure Range
- bar: 0 to 10
- kPa: 0 to 1,000
- psi: 0 to 145
Process Temperature
- -60° to 100° C (-76° to 212° F)
Resistance
- 260 ohms
Response Time
- < 100 milliseconds - for Pull-In
- < 70 milliseconds - for Drop Out
Rotation
- 360° - for Solenoid
Seat / Seal Material
- Viton - Valve Seals
Spring Material
- 302S26 Stainless Steel
- 316S42 Stainless Steel
Supply Pressure
- psi: 0 to 508 (kPa: 0 to 3,503, bar: 0 to 35)
Supply Voltage
- 110-240 Vac, 50 or 60 Hz
- 12-110 Vdc, 50 or 60 Hz
Temperature Range
- -20° to 100° C (-4° to 212° F) - Viton (Standard) O-Ring
- -25° to 130° C (-13° to 266° F) - Nitrile (Low Temperature) O-Ring
- -60° to 100° C (-76° to 212° F) - Fluorosilicone O-Ring
